Food grade centrifuge

Food Grade Centrifuge – All Stainless Steel Contact

Stainless Steel, Food Grade Centrifuge for Peppermint Oil Purification   Peppermint oil is used as a flavoring agent in a wide variety of consumable products such as toothpaste, chewing gum, soap etc. Raw peppermint oil contains moisture which needs to be separated before the oil is distilled to make it totally dry. Large amounts of …

Food Grade Centrifuge – All Stainless Steel Contact Read More »


Diesel Fuel Purifier System – Large Scale Application

Crude Oil transporting rail cars need to be cleaned periodically to remove accumulated sludge, waxes etc. Diesel is widely used as the washing fluid for such applications. One such rail car washing facility in the south-west uses approximately 10,000 gallons of fresh diesel everyday. The spent diesel could not be reused due the water and …

Diesel Fuel Purifier System – Large Scale Application Read More »

Crude Oil Heater and Filter Skid

Crude Oil Heater & Pre-Strainer

Crude Oil Heater & Pre-Strainer Dolphin Centrifuge designed and manufactured Dual Stage, Full Duplex Pre-Strainer with 90kW Electric Pre-Heater. System features: Self Purging, 2-Stage Duplex Filters, Air-Diaphragm Feed Pump with Pulsation Dampener, 90kW Electric Pre-Heater Specially Designed for Crude Oil Heating, Fully Automatic PLC/Touch-Screen Control Panel.

Used Oil Self-Cleaning Centrifuge

Large Scale WVO Centrifuge – 40 GPM

Commercial Scale WVO Centrifuge Application   A large-scale, mid-west waste-oil collection company contacted Dolphin Centrifuge to investigate the possibility of increasing the efficiency and throughput of their waste vegetable oil (WVO) recovery facility. The customer was processing 6M gallons annually of all sorts of waste oil streams primarily consisting of grease trap waste, UCO, yellow …

Large Scale WVO Centrifuge – 40 GPM Read More »

Biodiesel Centrifuge

Biodiesel Glycerin Separation Centrifuge

Biodiesel Glycerin Separation – Process & Application Details Biodiesel can be seen as an organic, renewable alternative to conventional diesel fuel. It is environmentally friendly due to lower emissions and usable in current engines designed to operate on diesel fuel. Click here for information about biodiesel. Organic fats and oils are converted to biodiesel by …

Biodiesel Glycerin Separation Centrifuge Read More »


Oilfield Centrifuge | Alfa Laval Decanter

Table of Contents Oilfield Centrifuge for Drill Cuttings Separation Solids control is an essential aspect of any oilfield drilling application. Solids control is the separation of solids generated by oilfield drilling. ‘Drill cuttings’ are separated from the fluid used to lubricate the drill. Drilling mud is another synonym for this lubricating fluid. Reuse of drilling …

Oilfield Centrifuge | Alfa Laval Decanter Read More »


Used Engine Oil Centrifuge

Used Engine Oil Centrifuge for Waste Oil Collection Company   Used oil collection and processing needs industrial scale purification equipment to handle large volumes of mineral oils with aqueous (water, engine coolant etc.) and sludge as contaminants. Filters or other filtration media are not suitable for continuous, reliable and consistent separation of used oils. Dolphin …

Used Engine Oil Centrifuge Read More »


Explosion Proof Centrifuge – Offshore Diesel Purification

Dolphin Centrifuge manufactures explosion proof industrial centrifuge systems for use in hazardous Location. Our control panels are designed for locations where concentrations of flammable gases, dust, vapors, or combustible particles can cause ignition and explosion. Explosion proof centrifuge configurations can be supplied with NEMA 7 (USA), ATEX approval and IECEX approval and certifications, based on …

Explosion Proof Centrifuge – Offshore Diesel Purification Read More »


Alfa Laval NX418 Decanter Centrifuge For Crude Oil Tank Bottoms

Centrifuge for Tank Bottom Processing Alfa Laval NX418 Decanter Centrifuge (2-Phase) for Crude Oil Tank Bottom processing was recently supplied by Dolphin Centrifuge. Recovery of sale oil from tank bottoms. The package was designed and built with Automatic PLC/HMI Controls, 90kW Electric Pre-Heater, 60GPM Heavy Duty Feed Pump with VFD Control and various alarm features.